| After tooling, cut off mortar tailings with trowel and brush excess mortar burrs and dust from face of brick. |
| At a minimum, sand down the area to remove any roughness or burrs, and touch it up with paint. |
| Growing to a height of some thirty metres, the bark is distinctively ridged and furrowed and has characteristic large burrs or bosses. |
| The tooling includes a deburring operation in which burrs are actually pushed back into the component so that a clean edge is left on the part. |
| In engraving, fine lines are incised directly into the plate and the burrs removed to produce clean, sharp lines on the print. |
| Sharpen only the beveled side of a blade, though you should remove burrs on the flat side. |
